Pumpjack

Pumpjack

Edit

Recipe
5 + 5 + 10 + 10 + 5 → 1
Total raw
21.25 + 7.5 + 35 + 5
Map color
Fluid storage volume	1000
Health	200 260 320 380 500
Stack size	20
Rocket capacity	20
Dimensions	3×3
Energy consumption	90 kW (electric)
Mining time	0.5
Mining speed	1
Mining area	1 tiles
Resource drain	100% 83% 66% 50% 16%
Pollution	10/m
Module slots	2 slots
Prototype type	mining-drill
Internal name	pumpjack
Required technologies
Boosting technologies
Produced by

Pumpjacks extract crude oil from oil fields. Each oil field can be covered by only one pumpjack at a fixed spot. The pumpjack will then output an amount of crude oil per cycle equal to 10 multiplied by the field's yield (e.g. 54 crude oil for 538% yield) per second. Without speed modules, one pumpjack cycle takes one second to complete.

Extracting oil lowers the field's yield by 1% per 300 pumpjack cycles to a minimum of 20% of the initial yield or 2 oil per second, whichever is larger. They are limited to a maximum output of 100 crude oil per cycle, achieved by an oil field with more than 999% yield. However, such a high yield is fairly rare with standard world generator settings.

Pumpjacks cannot be placed on a non-oilfield tile. Furthermore, the output pipe location is fixed relative to the pumpjack's orientation.

Tips

If oil fields are depleted (to the minimum of 20%) speed modules are a good option to raise the pumpjacks output. With two speed module 3's the output doubles from 2 to 4 crude oil per second and even more when using additional beacons, plus another 0.5 oil per beacon per second.

The formula to determine the modified output is:

Output of unmodified oil field * (number of modules in pumpjack * bonus from module) + output of unmodified oil field * (number of beacons * (number of modules * distribution efficiency) * bonus from module + 1).

Example
For 1 pumpjack on a depleted oil field with two level 3 speed modules and 6 beacons with each two level 3 speed modules:	2 * (2 * 0,5) + 2 * ( 6 * ( 2 * 0,5 ) 0,5 + 1 ) = 10 Crude oil per 1 second.
Assuming that there will be always 2 modules equipped in the pumpjack and beacons, the formula can be shortened:	2 + 2 * (6 * 0, 5 + 1) = 10 crude oil per second.

History

• 0.15.0:
  • Pumpjacks can be turned on and off using the circuit network. They can also output the current oil mining rate.

• 0.9.0:
  • Introduced

See also

• Fluid system