Module: Difference between revisions
m (Calculation) |
LowBattery (talk | contribs) m (→See also) |
||
| Line 190: | Line 190: | ||
* [[Assembling machine 1]] | * [[Assembling machine 1]] | ||
* [[Research]] | * [[Research]] | ||
* [[ | * [[Beacon]] | ||
* [http://www.factorioforums.com/forum/viewtopic.php?f=18&t=7985 Do Efficiency Modules Reduce Pollution?] | * [http://www.factorioforums.com/forum/viewtopic.php?f=18&t=7985 Do Efficiency Modules Reduce Pollution?] | ||
[[Category: Technology]] | [[Category: Technology]] | ||
Revision as of 18:26, 30 March 2017
Modules are items used to enhance existing buildings' capabilities. They are expensive, require appropriate research and are produced slowly, but can eventually greatly improve the efficiency of a factory. In addition to improving the efficiency of the factory, modules are also used in many late- and endgame recipes such as modular armor and its equipment.
Quick lookup sheet:
- If you want more products per second, use a speed module.
- If you want more products per input resource, use a productivity module.
- If you want more products per watt of energy, use an efficiency module.
Required research
 |
| |
| |
| |
Recipes
Tier one modules:
| Recipe: |  |
| Total raw: | |
Tier two modules:
| Recipe: | |
| Total raw: | |
Tier three modules:
| Recipe: |  |
| Total raw: | |
| Recipe: | |
| Total raw: | |
Types of modules
There are three types of modules in factorio, each with 3 tiers of effect. Crafting higher tiers requires lower tiers to be made.
Speed Module
Used in many Modular armor recipes. Increases the speed and energy consumption of a machine.
| Module | Speed bonus | Energy consumption |
|---|---|---|
| |
+20% | +50% |
| |
+30% | +60% |
| |
+50% | +70% |
Advantages & Disadvantages:
- Increases speed of machine.
- Increases energy use per cycle.
- Increases pollution generated due to energy consumption being higher.
Productivity Module
| Module | Productivity | Energy consumption |
Speed | Pollution multiplier |
|---|---|---|---|---|
| |
+4% | +40% | -15% | +5% |
| |
+6% | +60% | -15% | +7.5% |
| |
+10% | +80% | -15% | +10% |
Productivity modules add a second purple "production bar" at item producing buildings and labs. It fills at the speed of (production - 100%). When it reaches 100%, an extra item (or items, in recipes that result in more than one) is produced.
Productivity modules can only be used to make intermediate products. These are products that cannot directly be placed, but are used in other recipes. Examples include circuits, science packs and engine units.
Advantages & Disadvantages:
- Creates an additional free item occasionally.
- Increases energy use per cycle.
- Increases pollution generated.
- Slows the machine.
Efficiency Module
The efficiency module reduces the cost of electricity to run the machine. Note that minimal energy usage is 20% of base energy usage, to prevent the machine's running being free.
| Module | Energy consumption |
|---|---|
| |
-30% |
| |
-40% |
| |
-50% |
Advantages & Disadvantages:
- Reduces energy cost per cycle.
- No downsides
Usage tips
More modules of the same type in one device will give diminishing returns, as the negative attributes, such as bonus power consumption, will pile up and nullify the good effect. Because of that, it is generally more effective to add efficiency modules with speed and/or productivity modules to get more bonuses over the crafting cascade (assembly lines), especially when assembling machines are part of logistics network. This applies to situations where resources are plentiful but finite.
This is has been calculated through in this discussion.
Filling the device with speed modules is useful when a resource is infinite but the amount of resource pools is low. The best example would be oil deposits. Another good place to use speed modules would be for assembly machines which make products that take a long time to make. Examples would be engine units. Using speed modules allows for compaction of setups, because one machine can provide materials to more consumers than normal.
Filling devices with productivity modules is recommended when resources are scarce. Example would be alien artifact processing. It will take longer and more energy, but the overall produced products will be higher.
Filling devices with efficiency modules is recommended for electric furnaces as these use a lot of power. Efficiency modules also completely lack downsides, so filling all unnecessary module slots with Efficiency modules if possible is recommended.
Modules are also able to control Pollution, as pollution depends also on Energy usage. So reducing a machines energy usage by 40% with a efficiency module 2 will also reduce its pollution by 40%. Beware as this also works vice versa!
Productivity modules and speed modules
| In Assembly | In Beacon | Productivity | Electricity consumption |
Speed | Energy/ Unit |
Units/ time |
|---|---|---|---|---|---|---|
| 100% | 100% | 100% | 100% | 100% | ||
| |
110% | 180% | 85% | 193% | 93.5% | |
| |
120% | 260% | 70% | 310% | 84% | |
| |
130% | 340% | 55% | 476% | 71.5% | |
| |
140% | 420% | 40% | 750% | 56% | |
| |
|
140% | 455% | 65% | 500% | 91% |
| |
|
140% | 490% | 90% | 389% | 126% |
| |
|
140% | 525% | 115% | 326% | 161% |
| |
|
140% | 560% | 140% | 286% | 196% |
| |
|
140% | 595% | 165% | 258% | 231% |
| |
|
140% | 630% | 190% | 237% | 266% |
| |
|
140% | 665% | 215% | 221% | 301% |
| |
|
140% | 700% | 240% | 209% | 336% |
While the effects are biggest with the version 3 chips, this stacking effect is also very noticeable with version 2 chips. Or if the final 10% productivity doesn't matter that much, consider putting a speed chip in there too.
Examples of usage
Electric furnaces are huge power hogs at 180 kW per furnace. 1 basic efficiency module reduces it by 54 kW (-30%) - almost a Solar panel worth of power.
Electric mining drills create 9 units of Pollution with no efficiency modules and 1.8 with 3 basic ones.
Same Electric mining drill with 3 Productivity modules 3 would create 76.5 units of Pollution.