Logistic network

From Official Factorio Wiki
Jump to navigation Jump to search
RoboTrainStation.gif
This gif shows how robots can load or unload chests in a train station. The top track is for loading and there are Requester chests on both sides. The requested items are then filled into the wagons. The second track is the unloading track, the delivered items are filled into Active Provider chests and then put into the Storage chests at the very top and at the center. At the bottom the incoming ores from both sides are moved into Active Provider chests and then put into the requester chests at the top track.

Logistics robots are ideal in train stations, since you need very high item throughput on a short distance.

A Logistic network (LogNet) is a series of different chests and Logistic robots all covered by one or more Roboports.

Depending on the type and configuration of the chests and area of the Robotic network the robots will transport items between these chests as a power-hungry alternative to moving items manually, by belts or Railway network.

The player character can also act as Requester chest in the Logistic network, allowing you to 'request' various items be kept at a set limit within your personal inventory. After researching Character logistic slots you can configure an amount of Items and Logistic robots will start to move the specified Items from the network to your characters inventory.

Do not mix up LogNet and Circuit network. They share a common component (smart inserter), but are otherwise disconnected and do not exchange any information. Also do not mix up logistic network with construction network or combinations of the two called Robotic network.

Items

Roboport.png
Roboport
Centre of the Robotic network in which the Robots can move and with its coverage forming the logistic network.
Logistic robot Moves items between Logistic Chests. (*)
Active Provider chest Logistic Chest: Supplies the contained items to the logistic network. (**)
Passive Provider chest Logistic Chest: Supplies the contained items to the logistic network. (**)
Storage chest Logistic Chest: Stores Items currently not requested. Supplies the contained items to the Logistic network. (**)
Requester chest Logistic Chest: Will be filled by Logistic robots until the configured amount is reached. (**)
Smart-inserter.png
Smart inserter
Smart inserter: Can be turned on/off depending on the contents of a logistic network it is located in.

(*) At the beginning each robot can carry only 1 item. This amount can be increased by researching Logistic robot cargo.

(**) Logistic chests are also usable for a Circuit network by using wires.

Basic

To start with, just use passive provider- and requester chests! Place the passive provider chests at the output inserters of assemblies and requester chests at the input (let them request the needed items). Place a Roboport, which covers these chests with the inner area. Place some logistic bots.

The robots will begin to work.

You can now limit the number of produced item either with the Chest/Stack limitation-feature or - in the long term much better - with Smart inserters, which are configured to limit the number of available items in the logistic network.

How it works

Place some logistic bots anywhere, or in a Roboport, they will immediately begin to work.

The logistic bots try to fulfill the configured requests (requester chest) by moving items from storage- or active/passive provider chest to requester chest.

Usage

Logistic network is very capable for creating more and more complex items in a relatively small factory-area. Low complexity and high volume activities over longer distances (like smelting) can (and should) be left using belts or railway network.

The basic thing you need are Roboports. When you placed the port and hover it, you see a orange and a larger green area.

  • The orange zone is the Logistic Network area. This is also the maximum distance for connecting two roboports.
  • The green zone is the Construction area.

Blow up the logistic zone

Use more roboports to create a bigger logistic-zone! When the zones of two or more roboports touch or overlap, they are linked together to form a single network. This will show as a dotted line between the linked roboports (if they have power).

The roboports are not connected, if only the construction-zone touches.

The inner zone covered by a Robotic network is identical to that of the Logistic network. You see that also, when you build a roboport, if the Roboports are connected. All Logistic network/Chests inside the zone are connected and build the Logistic network. Imagine the logistic chests send their containments to the Roboports.

There can be many separate logistic networks. Two roboports are in the same network if you could fly from one to the other without leaving logistic network coverage. To prevent roboports from linking, you need to build them far enough away from each other so that the orange zones don't touch. If you don't link a roboport, the construction area isn't linked, too!

Bots do normally not fly from one network into another (exception: when running out of charge).

Danger of losing bots

Biters love bots! But they express their love... differently... :)

With v0.10.0 the bots are not longer destroyed, when running out of energy, but have then only 20% of their speed, which gives them the chance to reload and a chance for the player to find the problem.

This needs to be moved: Pay attention to robotic networks which form some kind of U-shape (where the shortest way between two chests goes over an uncovered area): if a bot runs out of charge in this area, and cannot return fast enough to a roboport, the bot falls to the ground and will be destroyed (along with anything it was carrying).

Running out of charge can happen also, if you overuse the roboports;' when the charging-queue for the bots gets too long, the bots (and their loads) get lost! A roboport can charge between 50 and 70 bots ... But this is not very efficient to have large queues of bots waiting for charge, cause that will reduce of course the overall throughput of them! Limit the number of bots or build more roboports for that case.

Advanced

Network info

A Logistic network knows the numbers of all Items stored in storage and active/passive chests and also the number of all items currently carried by Logistic robots. This information can be seen by hovering over a logistic chest:

  • you see the sum of all items in storage/provider chests (The list can get very long, this will be fixed)
  • currently on the way in this logistic network and
  • currently requested items.

Negative numbers

For some reasons, you can see negative numbers in the network info. This is not a bug. This means, that the bots can transport more than available (Logistic robot cargo).

Active/Passive Provider chest

The provider chest is used by the logistic bots as "source".

You insert the items into this chest with an inserter; a useful case is directly inserting the output of an Assembling machine/Furnace into this chest. Use a Smart inserter to limit the number of items you put into the logistic network!

The priorities between active and passive Provider chest are equal ( see http://www.factorioforums.com/forum/viewtopic.php?f=18&t=3415 )

active provider chest

  • The content of active provider chests is delivered to both requester and storage chests
  • Active provider chests are immediately emptied unless the demand for that item in requester chests is already met or there is no space in a storage chest left.

passive provider chest

  • The content of passive provider chests is delivered to requester chests only.
  • Passive provider chests are only emptied if there is a requester chest which has an unmet demand for those items.

Requester chest

The requester chest is used by the logistic bots as "target".

You can set the needed amount of items in the Requester chest. The logistic bots try then to deliver this requests. The logistic bots take the requested items (first from provider chests, then from storage chests), until the demand us fulfilled. (The delivered items can then be placed via Inserters to the destination, e. g. an Assembling machine).

more items then requested?

The delivered number of items in the requester chest can be higher than requested. This depends from the Logistic robot cargo-bonus you have researched.

Storage chest

This chest is used by the logistic bots as both, "source" and "target". You can use the storage chest in the same way as the active/passive provider chest: deliver items to the requester chests. But that is not it's purpose.

usage as target

The storage chest is used as target, when all other targets for the provider chests are fulfilled and if there are free bots left. Then the bots move items from provider- to storage-chest.

They try to move the item to a storage chest, that already contains items of the same type. Empty storage chests are filled first. This should avoid having storage chests with different items inside.

usage as source

Storage chests have a lower priority than provider chests. The bots look for a provider chest as source, before they search in a storage chest for that item.

useful cases for the storage chest?

This has been quite long discussed (See this and thread).

As the result the provider chest has been changed to the Active Provider chest and the Passive Provider chest was introduced.

There are now no cases, where the storage chest can't be used; there is always a way to integrate them into the layout and this is especially important for deconstruction or for example at Railway network/Train stations. see here )

The possible ways and order priorities

This overview reflects also the priorities, in which order the chests are filled/emptied.

Since v0.10.1 the order of the passive provider chest has changed from

   Active + Passive provider
   Storage

to

   Active provider
   Storage
   Passive provider

And is now like so:

Active  Provider chest       =>   Requester chest

Storage chest                =>   Requester chest

Passive Provider chest       =>   Requester chest

Active Provider chest        =>   Storage chest

To read this: Requests are coming from the requester- and storage chests and are accessed in this above given order.

  • A requested item is first looked up in the active provider chests, then in the storage chests, then the passive provider. So the active provider chests are emptied first, then the storage chests, then the passive provider chests.
  • If robots are free and there is space left in storage chests, and there are unrequested items in an active provider chests, the items are moved from active provider to a storage chest.
  • For the storage chests, the bots search for one storage, which has the same item already filled. Only if that can't be found, they "open up" a new storage chest. This should avoid having storage chests with different items inside.

In other words: the storage chests are filled, when all requests are fulfilled, emptied before using the passive provider chests and try to store only the items they already have inside.

Order of movement

The bots fulfill all requests with the same priority. The algorithm looks for the next free robot, then the next request in the queue and after giving orders to the robot, this request is put at the end of the queue, so that first all other requests are done.

The results are not optimal; it can happen, that the farest next bot will be requested, even if there is a much closer. Because of this, it's recommended to not use the logistic network for long distances and/or high throughput. (For that are the Railway network much more useful.)

See also