Tutorial:Applied power math

In this tutorial we'll be answering the question: how much coal is needed to power a factory?

First off, we need to know: how much power does our factory use? That's easy - you can check the electricity tab by clicking on a power pole.

Here we see one radar using 300 kW. Factorio uses real science here. A Watt (W) is a measure of energy transfer. A kilowatt (kW) is 1000 W, a megawatt (MW) is 1000 kW, and if you're lucky enough to ever make a factory big enough, a gigawatt (GW) is 1000 MW.

So that answers the question of how much power our factory uses. To keep our factory running at full speed we need to maintain 300 kW. For ease of comparison, we'll convert that to 0.3 MW.

Next question! How much power is stored in coal? That's also easy, because it tells us when we hover over it: 4 MJ.

A Joule is another standard measure of stored energy. As with Watts a kilojoule (kJ) is 1000 J, and so on. There is a fixed relationship between Joules and Watts. 1 Joule can provide 1 Watt of power for 1 second. As a formula:

   J = W × s

So to run our factory at 0.3 MW, we need to consume 0.3 MJ every second.

Quiz

How long could one piece of coal (4 MJ) run our single radar (0.3 MW)?

Expand to reveal answer

   4 MJ = 0.3 MW × s
      s = 4 MJ ÷ 0.3 MW
      s = 13.33

A bit more than 13 seconds.

What is the maximum size factory (in watts) a single piece of coal could run for 5 seconds?

Expand to reveal answer

   4 MJ = MW × 5
     MW = 4 MJ ÷ 5
     MW = 0.8

0.8 megawatts.

BONUS! A ton of real world coal contains about 21 GJ. How much does a piece of Factorio coal weigh?

Expand to reveal answer

The energy ratios will match the weight ratios, so:

   4 MJ / 21000 MJ = weight ÷ 1000 kG
            weight = (4 MJ ÷ 21000 MJ) × 1000 kG
            weight = 0.19 kG

About 190g! Still doesn't explain how our character can carry so much of it...

Now we have everything we need to answer our initial question: how much coal do we need to power our factory? Well, the question actually needs to be a bit more precise: how much coal do we need per second to power our factory?

Aside: why did the radar run for 20s and not 13.5s (50% of 27s)?

Because it doesn't turn on and off instantly. As you can see in the graph, it ramps up then ramps down. Technically, if you measured the area under the curve it would give you the expected 4 MJ.

Quiz

How much coal per second is needed to power a 20 MW factory?

Expand to reveal answer

Since J = W × s, a 20 MW factory will consume 20 MJ/s. Since coal contains 4 MJ, we'll need 5 coal per second (5 × 4 MJ = 20 MJ).

BONUS! How many mining drills are needed to produce that much coal?

Expand to reveal answer

Per the linked page, an electric mining drill produces 0.5/s, so we'll need 10 electric mining drills (10 × 0.5 = 5).

SECOND BONUS! The average American household uses 3.2 GJ in a month (typically expressed as 888 kilowatt hours). How much Factorio coal would be needed to power one of these homes for that period, and how many homes could a steam engine support (900 kW), assuming the power is used at a constant rate? (Assume 30 days in a month.)

Expand to reveal answer

   3.2 GJ = 3,200 MJ
   3200 MJ ÷ 4 MJ = 800

   3200 MJ ÷ 30 days ÷ 24 hours ÷ 60 minutes ÷ 60 seconds = 1234.5679 W
   900,000 ÷ 1234.5679 = 729

800 pieces of coal per household and a single steam engine could power 729 households exactly.