Types/NoiseExpression: Difference between revisions

From Official Factorio Wiki
Jump to navigation Jump to search
m (<syntaxhighlight lang="lua"> the if-else-chain example code block)
(Update about suggested_minimum_candidate_point_spacing and how to generate identical point lists)
Line 209: Line 209:
* '''candidate_point_count''' (constant integer, default:256) - how many candidate points to generate
* '''candidate_point_count''' (constant integer, default:256) - how many candidate points to generate
* '''candidate_spot_count''' (constant integer, default depends on skip_span) - an alternative to candidate_point_count - number of spots to generate: ```candidate_spot_count = X``` is equivalent to '''candidate_point_count / skip_span = X'''
* '''candidate_spot_count''' (constant integer, default depends on skip_span) - an alternative to candidate_point_count - number of spots to generate: ```candidate_spot_count = X``` is equivalent to '''candidate_point_count / skip_span = X'''
* '''minimum_candidate_point_spacing''' (constant number, default depends on region size) - minimum spacing to *try* to achieve while randomly picking points; spot noise may end up placing spots closer than this in crowded regions
* '''suggested_minimum_candidate_point_spacing''' (constant number, default depends on region size and candidate_point_count) - minimum spacing to *try* to achieve while randomly picking points; spot noise may end up placing spots closer than this in crowded regions
* '''hard_region_target_quantity''' (constant boolean, default: true) - whether to place a hard limit on the total quantity in each region by reducing the size of any spot (which will be the last spot chosen) that would put it over the limit.
* '''hard_region_target_quantity''' (constant boolean, default: true) - whether to place a hard limit on the total quantity in each region by reducing the size of any spot (which will be the last spot chosen) that would put it over the limit.
* '''density_expression''' (number-returningexpression) - an expression that will be evaluated for each candidate spot to calculate density at that point
* '''density_expression''' (number-returningexpression) - an expression that will be evaluated for each candidate spot to calculate density at that point
Line 215: Line 215:
* '''spot_radius_expression''' (number-returning expression) - an expression that will be evaluated for each candidate spot to calculate the spot's radius (this, together with quantity, will determine the spots peak value)
* '''spot_radius_expression''' (number-returning expression) - an expression that will be evaluated for each candidate spot to calculate the spot's radius (this, together with quantity, will determine the spots peak value)
* '''spot_favorability_expression''' (number-returning expression) - an expression that will be evaluated for each candidate spot to calculate the spot's favorability; spots with higher favorability will be considered first when building the final list of spots for a region
* '''spot_favorability_expression''' (number-returning expression) - an expression that will be evaluated for each candidate spot to calculate the spot's favorability; spots with higher favorability will be considered first when building the final list of spots for a region
The infinite series of candidate points (of which '''candidate_point_count''' are actually considered) generated by '''spot-noise''' expressions with the same '''seed0''', '''seed1''', '''region_size''', and '''suggested_minimum_candidate_point_spacing''' will be identical.  This allows multiple spot-noise expressions (e.g. for different ore patches) to avoid overlap by using different points from the same list, determined by '''skip_span''' and '''skip_offset'''.


== Example definition ==
== Example definition ==

Revision as of 22:10, 12 July 2019

Basics

A fragment of a functional program used to generate coherent noise, probably for purposes related to terrain generation.

Noise expressions can be provided as object literals or built using functions in the built-in noise library. noise.define_noise_function allows noise expressions to be defined using a shorthand that's a subset of Lua (see example definition for an example and its literal equivalent).

Mandatory properties

type

Type: Types/string

Name of the type of this expression. Which other properties apply depend on the expression type.

Expression types

variable

Reference to a pre-defined variable, constant, or a named noise expression.

Predefined variables include "x", "y", and "distance".

Properties:

function-application

Apply a function to a list or associative array of arguments. Some functions expect arguments to be named and some expect them not to be.

Function calls are their own class of expression (as opposed to every function just being its own expression type) because function calls all have similar properties -- arguments are themselves expressions, a function call with all-constant arguments can be constant-folded (due to referential transparency), etc.

Properties:

  • function_name (a string; see functions, below)
  • arguments (a list or associative array of argument expressions)

literal-boolean

Evaluates to the same boolean value (true or false) every time, given by the literal_value property.

literal-number

Evaluates to the same number every time, given by the literal_value property.

literal-string

Evaluates to the same string every time, given by the literal_value property.

Since the noise generation runtime has no notion of strings or use for them, this is useful only in constant contexts.

literal-object

Evaluates to the same object every time, given by the literal_value property.

e.g.

{
  type = "literal-object",
  literal_value = {
    name = "Bob Hope",
    birth_date = {
      year = 1903,
      month = 5,
      day_of_month = 29
    }
  }
}

Since the noise generation runtime has no notion of objects or use for them, this is useful only in constant contexts, such as the argument of the autoplace-probability function (where the 'literal object' is an AutoplaceSpecitication)

literal-expression

Returns the expression represented by its literal-value property.

procedure-delimiter

Evaluates and returns the value of its expression property, which is itself an expression.

This hints to the compiler that it should break the subexpression into its own procedure so that the result can be re-used in multiple places. For instance if you want to re-use the same multioctave noise for determining probability of multiple tiles/entities, wrap the multioctave noise expression in a procedure-delimiter. Alternatively, make the noise its own NamedNoiseExpression and reference it by name, using a variable.

if-else-chain

Has an arguments property that is a list of condition-result expression pairs followed by a default result expression, like so:

{
  type = "if-else-chain",
  arguments = {
    condition1, result1,
    condition2, result2,
    ...
    defaultResult
  }
}

The result of the if-else-chain is the value of the first result expression whose condition expression evaluated to true, or the value of the default result ('else') expression.

Functions

add

Arguments (positional): term, other term

Takes 2 positional arguments and adds them.

subtract

Arguments (positional): minuend, subtrahend

Takes 2 positional arguments and subtracts the second from the first.

multiply

Arguments (positional): factor, other factor

Takes 2 positional arguments and multiplies them.

divide

Arguments (positional): dividend, divisor

Takes 2 positional arguments and divides the first by the second.

exponentiate

Arguments (positional): base, exponent

Takes 2 positional arguments, and raises the first to the second power.

absolute-value

Arguments (positional): value to be absoluted

Takes a single positional argument and returns its absolute value. i.e. If the argument is negative, it is inverted.

clamp

Arguments (positional): value to be clamped, lower limit, upper limit

First argument is clamped between the second and third. The second is treated as a lower limit and the third the upper limit.

ridge

Arguments (positional): value to be ridged, lower limit, upper limit

Similar to clamp but the input value is folded back across the upper and lower limits until it lies between them.

factorio-basis-noise

Arguments (named):

  • x
  • y
  • seed0 - integer between 0 and 4294967295 (inclusive) used to populate the backing random noise
  • seed1 - integer between 0 and 255 (inclusive) used to provide extra randomness when sampling
  • input_scale (default: 1) - x and y will be multiplied by this before sampling
  • output_scale (default: 1) - output will be multiplied by this before being returned

Scaling input and output can be accomplished other ways, but are done so commonly as to be built into this function for performance reasons.

factorio-multioctave-noise

Arguments (named):

  • x
  • y
  • seed0 - integer between 0 and 4294967295 (inclusive) used to populate the backing random noise
  • seed1 - integer between 0 and 255 (inclusive) used to provide extra randomness when sampling
  • octaves - how many layers of noise at different scales to sum
  • persistence (constant) - how strong is each layer compared to the next larger one
  • input_scale (default: 1) - x and y will be multiplied by this before sampling
  • output_scale (default: 1) - output will be multiplied by this before being returned

spot-noise

Generates random conical spots. The map is divided into square regions, and within each region, candidate points are chosen at random and target density, spot quantity, and radius are calculated for each point (or one of every skip_span candidate points) by configured expressions. Each spot contributes a quantity to a regional target total (which is the average of sampled target densities times the area of the region) until the total has been reached or a maximum spot count is hit. The output value of the function is the maximum height of any spot at a given point.

The parameters that provide expressions to be evaluated for each point (all named something_expression) need to actually return expression objects.

The quantity of the spot is assumed to be the same as its volume. Since the volume of a cone is pi * radius^2 * height / 3, the height ('peak value') of any given spot is calculated as 3 * quantity / (pi * radius^2)

Arguments (named):

  • x (number)
  • y (number)
  • seed0 (constant integer) - random seed, part 1 - usually the map seed is used
  • seed1 (constant integer) - random seed, part 2 - usually chosen to identify the noise layer
  • region_size (constant integer, default: 512) - width/height of each region
  • skip_offset (constant integer, default: 0) - offset of the first candidate point to use
  • skip_span (constant integer, default: 1) - number of candidate points to skip over after each one used as a spot, including the used one
  • candidate_point_count (constant integer, default:256) - how many candidate points to generate
  • candidate_spot_count (constant integer, default depends on skip_span) - an alternative to candidate_point_count - number of spots to generate: ```candidate_spot_count = X``` is equivalent to candidate_point_count / skip_span = X
  • suggested_minimum_candidate_point_spacing (constant number, default depends on region size and candidate_point_count) - minimum spacing to *try* to achieve while randomly picking points; spot noise may end up placing spots closer than this in crowded regions
  • hard_region_target_quantity (constant boolean, default: true) - whether to place a hard limit on the total quantity in each region by reducing the size of any spot (which will be the last spot chosen) that would put it over the limit.
  • density_expression (number-returningexpression) - an expression that will be evaluated for each candidate spot to calculate density at that point
  • spot_quantity_expression (number-returningexpression) - an expression that will be evaluated for each candidate spot to calculate the spot's quantity
  • spot_radius_expression (number-returning expression) - an expression that will be evaluated for each candidate spot to calculate the spot's radius (this, together with quantity, will determine the spots peak value)
  • spot_favorability_expression (number-returning expression) - an expression that will be evaluated for each candidate spot to calculate the spot's favorability; spots with higher favorability will be considered first when building the final list of spots for a region

The infinite series of candidate points (of which candidate_point_count are actually considered) generated by spot-noise expressions with the same seed0, seed1, region_size, and suggested_minimum_candidate_point_spacing will be identical. This allows multiple spot-noise expressions (e.g. for different ore patches) to avoid overlap by using different points from the same list, determined by skip_span and skip_offset.

Example definition

To override the 'temperature' named noise expression with one that linearly increases to the southeast:

local noise = require("noise");

data:extend{
  {
    type = "noise-expression",
    name = "togs-new-temperature-function",
    intended_property = "temperature", -- Makes this available in the 'temperature generator' drop-down
    expression = noise.define_noise_function( function(x,y,tile,map)
      return (x + y) / 1000
    end)
  }
}

Which is equivalent to:

local noise = require("noise");

data:extend{
  {
    type = "noise-expression",
    name = "temperature",
    expression = {
      type = "function-application",
      function_name = "divide",
      arguments = {
        {
          type = "function-application",
          function_name = "add",
          arguments = {
            {
              type = "variable",
              variable_name = "x"
            },
            {
              type = "variable",
              variable_name = "y"
            }
          }
        },
        {
          type = "literal-number",
          literal_value = 1000
        }
      }
    }
  }
}

See also