Train
Jump to navigation
Jump to search
< Train
- Vehicle/Train: If you want to transport items, place a locomotive and wagon or a second loco close to each other on the track. You will see, when they connect!
- Vehicle/Train/Locomotive: A train needs a locomotive at minimum.
- Vehicle/Train/Driving: When you enter a train (press Enter-Key to enter), you can drive it.
- Vehicle/Train/Wagon: A wagon is like a rolling chest, but the inserters can grep into it from a farer distance.
- Vehicle/Train/Coupling and decoupling: "G" couples. "V" decouples the last wagon/loco.
- Vehicle/Train/Defence: A stopped train can be destroyed by the natives.
- Vehicle/Train/Repair: Like refueling, try to put a Robotic network with Construction robots and some Repair packs at a train station, so that any eventual damage is repaired.
- Railway network/Do not cross the tracks: A train is very fast and it might happen, that you cross the track and a train comes and drives you dead. So be carefully with crossing. This is also true for any other entity. Especially the natives, which try to destroy standing trains easily, they don't have a chance against a driving train.
- Railway network/Train make-up: 1, 2, 3 or more wagons? No matter how long, it's a good idea to make all trains for the same route the same length. The optimal length depends on the distance, the train has to drive and the transported amounts. Quick calculation: You can transport with one wagon about 1000 resources and you need normally about 30 second to fully load/unload that and in the optimal case with 6 inserters on both sides you can do it in 10-15 seconds. The layout of your Railway network/Train station needs to fit to that requirements.
