In other languages: Deutsch Español Français 日本語 Polski Русский Українська Tiếng Việt Nam 简体中文

Railway: Difference between revisions

From Official Factorio Wiki
Jump to navigation Jump to search
No edit summary
Line 107: Line 107:


<br style="clear:both" />
<br style="clear:both" />
== Deadlocks ==
A deadlock or gridlock can happen, when every train is locked by another. In nearly every case two or more trains are standing so, that every train blocks by minimum one other train.
=== How can a deadlock happen? ===
See [http://www.factorioforums.com/forum/viewtopic.php?f=54&t=6984&p=54689#p54689 this article].
=== Factors that influence the deadlock chance ===
* It depends on train length (shorter trains will have a lower chance with the same rail/signal layout)
* Depends also on size of the blocks: More space for the blocks means lower chance of deadlock.
* Depends on track layout: Some layouts have a higher chance of locking, than others.
* The more trains you have, the bigger the chance.
* The chance is also much higher, if the trains need to wait often in areas with rail-crossings.
=== A deadlock can happen only by chance ===
Deadlocks will happen by chance only!
It is possible, that you use a quite volunerable layout, but with short trains and low traffic you never achive a deadlock in a game. The same can happen the other way around.
There is no simple mechanism to forecast, if and when a deadlock can happen, but with some experience and using the above ideas and the links below, this is a easy manageable problem.
=== How to reduce the chance for gridlock? ===
* Don't use 4-way junctions or circles to create junctions.
* Use better 3-way junctions. See [http://www.factorioforums.com/forum/viewtopic.php?f=18&t=9044 A Detailed Look at a Bidirectional Three-way Train Intersection]
* Use circles only for changing direction of train
* Build more tracks around junctions. try to avoid jams around junctions. If that doesn't help, use more tracks. :)
== Railway Safety ==
== Railway Safety ==
[[File:fff-140-controlled-gates.gif|thumb|An example of a safe railway crossing.]]
[[File:fff-140-controlled-gates.gif|thumb|An example of a safe railway crossing.]]

Revision as of 23:16, 7 October 2016


Not-enough-repair-packs-icon.png
Page "Railway" has been recommended for clean-up. Reason: Lots of outdated info, should be updated to completely reflect V0.13. The large amount of links at the bottom should also be dealt with.
This may mean fixing grammar or broken links, providing better explanations, or removing incorrect/outdated info.
Further recommendations for this page's clean-up can be made at Talk:Railway.

For the research see Railway (research)

The Railway is one of the main transport methods in Factorio. Although the installation of such a network can be complicated, and requires a large amount of resource and space, it is faster and more efficient than belts and robot logistics, especially over large distances.

Railway construction, however, is not understood in an instant. It takes some time to learn the basics, such as automating transportation. Learning how to manage and upkeep a larger train network takes time and experience.

Railway/Tutorials
Sometimes a picture/video says more than a thousand words.

Tracks

The small green arrow used to start the planner.

Rails are placed using the rail planner. Place a single rail, then mouse over the rail while still holding rails in hand. A green arrow will appear on the rail indicating the direction the new rail will be placed. Click or shift-click on the triangle to start the manual or ghost planner.

Bear in mind that rails can rails are placed on a two-tile grid, so you cannot move a rail by only one tile.

The rail planner operating in manual mode.
The rail planner operating in ghost mode.

Manual Planner

The manual planner can be used to place rails at close range, around 10 rails at a time. The rails will path towards the cursor. Move the cursor until you get the desired path, then left-click to place the rails. This process will repeat until you press Esc to release the planner.

Ghost Planner

The ghost planner can be used to place long stretches of rail at once, by creating ghosts of rails that can be placed by construction robots, either from roboports or a personal roboport. Move the cursor to the position you want the rail to terminate, press R to rotate the last rail to the desired orientation, then left-click to place the ghost rails. The rails will be placed using the shortest route from the origin to the destination avoiding obstacles. You can shift-click to use the shortest route; trees and stone rocks in the way will be marked for destruction. Use Esc or Q to release the planner.

File:Rail-switch-example-1.png
Composition of rails to form switches, straight and diagonal.
File:Railway-parallel-example.png
Switching between rails with and without adequate spacing.

Switches

  • There is no visual representation of a working switch. Using the rail planner, the player must place a rail overlapping an existing rail to form a switch.
  • The crossing of two straight tracks is not usable as switch, as trains have a limited turning radius. They do, however, connect signal blocks which helps prevent collisions.
  • Parallel tracks do not interact with each other and generally have no problems. However, switching from one track to the other can require extra resources if they are too close together; the track must turn away from the other parallel track and then turn back to it. This can create complicated networks of signals and, as such, one should generally not build parallel tracks unless they are spaced adequately.


Crossing tracks

An example of a safe railway crossing.

Be careful when crossing tracks!

Trains travel extremely quickly, and deal large amounts of damage when they impact a target. If no precautions are taken, crossing the track can result in a swift death.

Avoiding unwanted contact with trains

A checklist of proper track crossing etiquette:

  1. Zoom out, so that you can see a train coming.
  2. Look left, then right.
  3. Check for signals nearby: If a rail signal suddenly jumps from green to red or green to yellow, a train is coming. Do not cross.
  4. Avoid walking near the tracks, as you do not need to be fully on the tracks to get hit.
  5. While it is possible to get into/out of a train while it is moving, a miss can cost your life. The sides of the train can still deal damage.
  6. Heavy shields can be used to reduce the damage taken. In extreme cases, it is possible to stop a train with your body.
  7. All entities with health will take damage getting hit by a train, so take care not to leave a Car or Tank on the tracks.
  8. Trains far from a train stop will be travelling at (near) max speed, so take extra precaution when crossing and zoom out further. Trains near a train stop or signal will slow down to stop, and will be travelling slower.

Cross the tracks safely

Since version 0.13, a safe railroad crossing like the example shown in the picture can be built. This works by restricting access to the tracks when an oncoming train has the rails reserved. When the player is on the rails, the signals are reserved by the circuit network, and the train must stop and wait until the player leaves the tracks. When a player is inside the area crossing the tracks, the train gates are closed so the player can't get on the tracks outside the crossing. This is to completely ensure a safe crossing.

Trains

Diesel locomotive Cargo wagon |-
File:Railway-locomotive-gui.png
Locomotive screen: 1: switch to schedule screen; 2: Fuel inventory;
Placing a Cargo wagon so it is attached to the train.
A very minimal station.
  • A train consists of at least one locomotive, but the player may add additional locomotives to keep the train moving at maximum speed, allow it to move in both directions automatically, or they may add Cargo wagons to transport resources with the train.
  • Locomotives may be manually driven forwards or backwards, however, locomotives are generally slower going backwards. The left and right movement keys are used to change direction at switches.
  • Trains can only drive forwards automatically; there must be a forward path from to the destination station. This can be solved by placing a locomotive at either end of a train (facing opposite directions), or adding a loop in the rail. Note that signals in a loop can misbehave due to detecting trains before they arrive.
  • A train needs fuel to drive. Fuel can be added by inserters.

The locomotives' inventory is only used for Fuel. To transport items Cargo wagons have to be attached to the train. To attach a Cargo wagon, the player may either prepare to place one near an existing train, where a green graphic will show the player that the cargo wagon will be attached, showing a connection between the train and the new wagon. Alternatively, the player may manually connect cargo wagons to trains with the stock connect key, if the cargo wagon was placed far away from a train. The cargo wagons can be filled manually or by adjacent Inserters.


Signals

Rail signal Rail chain signal |-
File:Railway-signals-1.png
Block #1 is occupied, signal into that Block is red. Block #2 is approached, thus showing yellow, other blocks are free, signals showing green.
Train Station with multiple Train stops and Rail signals to allow operation of multiple trains on single track.
File:Railway-signals-2.png
Block #1 occupied, signal red. Block #2 approaching, showing yellow. Chain signal #3 is reflecting block signal #2. The chain signal #4 is showing red, because the block is to be approached from another direction, thus the block is considered occupied.
File:Railway-test-setup.png
A simple test setup to start with. Containing Train stops for schedules, and Rail signals to watch their behaviour.

Understanding rail signals can be difficult. Several terms critical to understanding them are below:

  • Rail segment
A piece of track (one item).
  • Segment
A single path of continuous track without intersections or switches. This becomes important when signals are employed. The player may mouse over a segment to see its number.
  • Block
A set of segments defined by rail signals. By default every connected segment belongs to one block, no matter whether a train can drive on it or not, and even if it can be driven only in one direction (e.g. at a switch, both segments of the switch belong to the same block). The player can see the current block numbers of a rail piece in the info section on mouseover. See also this forum post for a good explanation about blocks.

Rail signals are used to employ multiple trains automatically. Note that driving a train manually ignores most of the rules described here; other automatic trains will follow signaling indicted by the player's movement dynamically, however it will sometimes be not possible to avoid a collision for automatic trains if the player ignores red/yellow signals. Always beware automatic trains and give them the right of way.

Basic Signalling Rules

  • There is at most one Train in a block at any time. A train spanning multiple blocks occupies them all.
  • A red signal means that the following block is occupied by a train.
  • A yellow signal means that a train is approaching and already has the approval to enter the following block.
  • Rail signals separate a new block and reflect its state: green - free, yellow - reserved, red - occupied
  • Rail chain signals separate a new block and reflect the state of the next Rail signal
  • A train can only pass a signal on the right of the track, or if there is a signal on both sides on the same rail segment.


Deadlocks

A deadlock or gridlock can happen, when every train is locked by another. In nearly every case two or more trains are standing so, that every train blocks by minimum one other train.

How can a deadlock happen?

See this article.

Factors that influence the deadlock chance

  • It depends on train length (shorter trains will have a lower chance with the same rail/signal layout)
  • Depends also on size of the blocks: More space for the blocks means lower chance of deadlock.
  • Depends on track layout: Some layouts have a higher chance of locking, than others.
  • The more trains you have, the bigger the chance.
  • The chance is also much higher, if the trains need to wait often in areas with rail-crossings.

A deadlock can happen only by chance

Deadlocks will happen by chance only!

It is possible, that you use a quite volunerable layout, but with short trains and low traffic you never achive a deadlock in a game. The same can happen the other way around.

There is no simple mechanism to forecast, if and when a deadlock can happen, but with some experience and using the above ideas and the links below, this is a easy manageable problem.


How to reduce the chance for gridlock?

  • Don't use 4-way junctions or circles to create junctions.
  • Use better 3-way junctions. See A Detailed Look at a Bidirectional Three-way Train Intersection
  • Use circles only for changing direction of train
  • Build more tracks around junctions. try to avoid jams around junctions. If that doesn't help, use more tracks. :)

Railway Safety

An example of a safe railway crossing.

Trains travel very quickly and deal great damage upon impact. Without proper railway safety, crossing an active track can result in a swift death.

Some tips for avoiding unwanted contact with trains:

  • Zoom out before crossing so you can see trains coming.
  • Check for nearby signals; if a signal changes from green to yellow or red, this means a train is approaching.
  • Avoid walking near tracks; you can be hit even if you are not fully on the track.
  • Do not try to enter/exit a train while it is moving.

Crossing Safely

A safe railway crossing can be created by never allowing a train and the player on the track at the same time. When a train has the segment reserved, the gates close to the player, restricting access to tracks. When the player is on the tracks, the signals are reserved by the circuit network, and trains must wait for the player to clear the tracks before continuing. The gates onto the rest of the track also close, preventing the player from getting to the tracks outside the crossing.

Defence of rail systems

As trains are a priority target of Enemies, any place where trains can stop should be (more or less) defended. This is of course more important at train stops/stations. When a train moves it is more or less invincible and destroys nearly everything in the way, especially Enemies and players.

Relationship to OpenTTD

Factorio's railway system works basically exactly like the block signals in Open Traffic Tycoon Deluxe. Players who have ever played that game will find some elements of it in Factorio. If not, they can learn from the OpenTTD documentation.

User tips and tricks

This section contains further links to in-depth knowledge. As a general advisory, tips given in this section detail the more intricate mechanics in the game and can be dangerous to the experience of players who wish to discover better methods on their own. Be warned that much of the info below could be outdated/incorrect.

About Trains

About train stations and stops

About Signalling

Misc tips