In other languages: Čeština Deutsch Français 日本語 한국어 Polski Русский Українська 简体中文

Pump

From Official Factorio Wiki
Revision as of 17:07, 16 March 2016 by Joefesok (talk | contribs) (Replaced electrical engine with raw requirements)
Jump to navigation Jump to search

Template:Machinery A Small Pump (when powered) moves fluids from its input to its output and (regardless of power) prevents the opposite from happening. This happens even if the pressure of input is much lower than the pressure of output (although speed may be affected). Note that the pump can't mix different kinds of liquids.

The small pump can be seen as the inserter for liquids.

Throughput (needed number of pumps)

The throughput depends on the pressure difference between input and output.

In the worst case (no input pressure, max output pressure) you need 5, better 6 small pumps, to fill a pipe to its max throughput.

Using as Valve

The small pump works as a valve:

  • When powered, the small pump will let liquids through, but only in its set direction. The throughput depends on the pressure, see above.
Tip: You can just rotate the pump to "switch a pipe off". This is sometimes handy.
  • If unpowered, the small pump doesn't let anything through.
This can be used to control some parts of your factory (but currently it is very complicated).

An example, which uses some useful properties of the pump, can be found on the forums.

See also

Template:MachineNav