切换语言: Deutsch English Français Italiano 日本語 한국어 Polski Русский Українська

机械臂

From Official Factorio Wiki
Jump to navigation Jump to search
< Transport network | zh

机械臂是将物品从一处移动到另一处的一种装置,其作为自动化运作的其中重要一环并大量地使用。其形状就像一只机器人手臂,能够将物品从一个方位抓起,移动到相反的另一个方位放下。例如,我们使用其将物件从一个装置移动到另一个装置里,将物件在容器(例如箱子)或者传送带里放入或拿出。

机械臂特性

机械臂可以:

  • 从地面、或传送带、或任何能将物品堆叠成的东西(包括箱子冶炼炉制造机)内捡起物品。
  • 将物品放到地面、或传送带、或任何能有剩余空间将物品堆叠成并且的东西。

机械臂能根据放入处所需要的物品捡起相应物品,这意味着允许不同物品在同一条传送带上公用一个机械臂往其他机械臂或机器捡入物品。

File:Mpstark-UlSB2pr.gif
智能机械臂只捡取过滤器所规定的物品

另外,智能机械臂在没设定红绿线逻辑系统下,只会捡取过滤器所规定的物品,除了设定了红绿线系统但没有设置过滤器时则会捡取任何物品。

抓取限制

机械臂当捡入方已经有足够的物品会停止工作。例如,如果一个锅炉有5个或超过的燃料,机械臂就不会捡入燃料,直到低于5个时会恢复运作,直接燃料数目恢复为5个。

实体 物件类型 捡入限制 备注
锅炉热能机械臂冶炼炉 燃料 5 Modders 应该忽略带有燃料的冶炼炉配方。
机枪炮塔 弹药 10 从 v0.8.4开始
制造机冶炼炉 配方所需物件 配方所需物件数量的两倍
研究中心 科技包 生成一点研究点所需科技包数的两倍

一个机械臂从物品的容器(如箱子)将成堆的物品捡入一个建筑时可能会发生超过捡入物品堆限制。多个机械臂捡入物品时也会可能发生类似情况。

机械臂与传送带

传送带能运送两线的物件,机械臂只能往其中一条线放置物品。放置到哪一条线取决于机械臂在传送带哪一侧,如果想知道传送带换线的话,请查看Transport_belts/Belt_lane/zh#Changing_side_of_lane

File:Mpstark-5RdLql0.gif
机械臂永远将物品放置到离自己远的一侧。
File:Mpstark-8pfqtMV.gif
机械臂优先抓取近自己一侧的物品线
File:Mpstark-0XL7KBq.gif
当机械臂和传送带方向相同时,机械臂会将物品往靠向其旋转的方向的传送带一侧,默认情况下,水平的会靠顶的一侧,垂直的会靠左的一侧。如果从传送带拿出时,方向可能会改变(参见[1]
File:Mpstark-5ceWt8I.gif
物件会被带到传送带末端地面上,机械臂刚好能从捡起端地面捡起物件,所以传送带末端应该延伸到机械臂捡起端地面前或旁一格。而且这样做会另机械臂转的速度比平时快,当在传送带的物品出现机械臂可捡起范围时,不需要旋转完整180度。
File:Mpstark-UayT5wJ.gif
机械臂能放置物件在:
  1. 所有类型传送带
  2. 所有地下传送带的入口或出口
  • 机械臂可以在传送带转弯处,但也会有机会造成物件堵塞
  • 机械臂不能往分离器上放置物品。
  • 机械臂能从以下位置捡起物件:
    • 分离器出口
    • 传送带前半部分
  • 机械比在以下位置捡起物品时会有问题:
    • 从太快的传送带,物件移动得太快以至于冲过机械臂的可捡起范围(黄臂最高适应黄带,绿臂或蓝臂最高适应蓝带)
    • 从传送带转角处(黑臂不能从转角出捡起物品,参见[2]
    • 从地下传送带出口或入口

强力用法

机械臂速度

(Taken from http://www.factorioforums.com/forum/viewtopic.php?f=18&t=4637)

Item-type Rotation-speed (turn per Tick)
Extension-speed (Tile per Tick)
turn / Game-second
Tile / Game-second
Rotations (full turns!) per Game-second
Extension per Game-second (sec/Tile)
热能机械臂 0.01 turn/tick
0.02 tile/tick
0.6 turn/sec
1.2 tile/sec
1.667 sec/full turn
0.833 sec/tile
Basic inserter 0.014 turn/tick
0.028 tile/tick
0.84 turn/sec
1.68 tile/sec
1.191 sec/full turn
0.595 sec/tile
Long handed inserter 0.02 turn/tick
0.04 tile/tick
1.2 turn/sec
2.4 tile/sec
0.833 sec/full turn
0.416 sec/tile
高速机械臂 0.035 turn/tick
0.07 tile/tick
2.1 turn/sec
4.2 tile/sec
0.476 sec/full turn
0.238 sec/tile
Smart-inserter.png
Smart inserter
0.035 turn/tick
0.07 tile/tick
2.1 turn/sec
4.2 tile/sec
0.476 sec/full turn
0.238 sec/tile

Fast inserter and smart inserter have the same speed.

旋转速度

Convention: 2π rad = 100% of a circle rotation = 1 turn (or one full rotation)

展开速度

The extension-speed is normally not visible (only when compared to other inserters), but there are measurable speed differences when taking - for example - from the near or the far side of a belt.

This effect is also important for Train stations, when unloading items from wagons, cause the inserters needs to stretch out to the center of a wagon, which is some tiles long and leads to visible slower speed.

移动与能量消耗

The energy usage is not dependend on the amount of rotation (or extension), it is depending if the inserter starts an action, which is like grabbing, moving, release and returning.

类型

Item-type Max power Description
热能机械臂 180 W (burner) Most basic inserter, needs burning fuel.
Inserter.png
电力机械臂
13 W Basic electric inserter.
Long handed inserter 18 W Basic inserter able to grab Items from 2 tiles distance.
高速机械臂 30 W Working at double speed.
Smart-inserter.png
Smart inserter
40 W Able to connect to Circuit network and Logistic network, to specify working conditions. Can grab also specified item types only.

特别表现

参见