Beacon/fr

Balise

Modifier

Recette

15 + 20 + 10 + 20 + 10 → 1

Ressource totale

232.5 + 135 + 60 + 40 + 10

Recette

15 + 20 + 10 + 20 + 10 → 1

Ressource totale

327.5 + 325 + 120 + 80 + 10

Couleur sur la carte
Point de vie	200
Taille de la pile	10
Efficiency	50%
Dimensions	3×3
Consommation d'énergie	480 kW (électrique)
Temps de minage	0.2
Supply area	9 tiles
Emplacements pour module	2 emplacements
Type de prototype	beacon
Nom interne	beacon
Technologies nécessaires
Produit par
Overall effect stacks with multiple beacons covering the same machine.

Une balise est un dispositif qui transmet les effets des modules aux machines voisines, dans un carré de 9×9. Les effets ne sont transmis qu'à la moitié de leur efficacité. Cependant, une balise permet de transmettre l'effet d'un module à plusieurs machines et l'effet de toutes les balises à portée d'une même pile de machines. De plus, les balises peuvent fournir des impulsions au-delà des limites normales des emplacements de modules internes, comme l'augmentation de la puissance d'un puits épuisé à 0,25 pétrole par cycle où, à elle seule, elle ne peut atteindre que 0,2 rendement.

Utilisation

Les balises sont les meilleures dans les scénarios suivants :

• Il y a beaucoup de machines compatibles dans une zone dense

Cela permet à l'effet de la balise d'atteindre plusieurs machines, ce qui permet au joueur d'économiser les matériaux de fabrications des modules.

• Il y a une machine qui doit avoir une vitesse de fonctionnement extrême

Les foreuses minières en sont le meilleur exemple. Lorsqu'une parcelle de minerai est petite mais riche, il faut plus de vitesse par foreuse pour répondre à la demande, car il n'est pas possible d'ajouter plus de foreuses. Ainsi, des balises à modules de vitesse multiples autour d'une foreuse minière (avec des modules dans la foreuse elle-même) peuvent être utilisées pour augmenter plusieurs fois la vitesse de la foreuse individuelle, afin de compenser la faible quantité de foreuses.

---

Les balises ne devraient pas être utilisées dans les scénarios suivants :

• La (les) machine(s) en cours de suralimentation ne fonctionnent pas souvent.

Cela entraîne un gaspillage d'énergie car les balises consomment toujours de l'énergie, même lorsque les machines qu'elles boostent sont à l'arrêt. Ceci peut cependant être contourné avec un peu de planification et en utilisant un interrupteur.

• Essayer de booster les machines non compatibles avec les modules

Seules les machines qui ont des emplacements de module seront affectées par une balise.

Limitations

• Seuls les bâtiments dotés d'emplacements pour modules peuvent bénéficier de l'effet de balise (c'est-à-dire que l'effet de balise sur une tourelle laser n'est pas bénéfique). Les seules exceptions à cette règle sont les balises elles-mêmes qui ne bénéficient pas des modules insérés en elles-mêmes (ou d'autres balises), donc leur coût énergétique ne peut être réduit.

• Actuellement, seuls les modules de rapidité et d'efficacité peuvent être utilisés dans les balises, et le module de productivité ne peut pas.

• L'effet qu'une balise transmet n'est que la moitié de l'effet des modules qu'elle contient. Ainsi, deux du même module = la valeur d'un module transmis. Cette limitation peut être surmontée avec plus de balises dont les zones qui se chevauchent.

Maximum number per building

The maximum number of beacons that can be built in range of a building depend on that building's footprint:

• Buildings from 2×2 to 4×4 size: 12 beacons.

Note that this configuration may not be practically possible without using robots to supply the building, as there may not be enough room for belts and inserters.

• 5×5 buildings: 16 beacons.

The only building of this size that can benefit from beacons is the oil refinery. These cannot be supplied by robot, but all their inputs and outputs are piped fluids (except with coal liquefaction), meaning inserters are not needed and also offering the more versatile 9-tile (without transitions) maximum length of the underground pipe.

• 9x9 buildings: 20 beacons.

Curently, the only building of this size in-game is the rocket silo. Unlike with smaller buildings, this configuration allows for a 2-tile gap in between the beacons and the building and a 1-tile gap between beacons aligned with the center tile of the building, allowing space for belts and inserters.

The maximum number of beacons that can be built in range of a row of buildings:

• Row of 3×3 buidings: 8 beacons.

Every building in the row can be in range of 8 beacons (end-of-row buildings possibly more) if a double row of beacons (no spaces between) is built in parallel (may be up to 2 tiles distant). However, the center row of buildings to be boosted must be offset relative to the beacon row; i.e., the center tile of no building on the center row may lie on a line connecting the center tiles of any pair of facing beacons on the two beacon rows.

• Row of 5×5 buidings: 10 beacons.

The same rules apply as before, with the exception that now the center row must not be offset; i.e., centers of boosted buildings must align with the centers of some beacon pair. This requires leaving a gap of 1 tile between buildings on the center row (assuming the beacon rows are gapless). As the only beacon-eligible 5×5 buildings are oil refineries, the free tile is actually useful to make the row player-traversable (a gapless row of refineries is not).

Beacon arrays

Beacons can boost the overall capabilities of a factory quite significantly. However, they consume a considerable amount of power (480 kW apiece), take up nontrivial space, complicate logistics, and also are relatively expensive to craft. Therefore, when building an entire production line with a high beacon boost, it is significantly more economical to build a row of production buildings surrounded by row(s) of beacons, rather than single buildings surrounded by the maximum number of beacons theoretically possible. This also simplifies logistics and makes the design more tiling-friendly.

The maximum possible benefits are reduced somewhat in row-array configuration (for 3×3 buildings, 8 beacons per building are possible instead of 12; for 5×5 buildings, 10 instead of 16), but the number of beacons required to achieve this boost level is considerably lower. For example, for a single row of 3×3 buildings surrounded by a double row of beacons so that each production building is in range of 8 beacons, the total number of beacons required is 2n + 6, where n is the number of production buildings.

The average number of beacons per building is then 2 + (6 ÷ n), which tends toward 2 (i.e., a 75% reduction in the number of beacons needed compared to isolated buildings with 8 distinct beacons each) when n goes to infinity. For e.g. n = 10 the formula evaluates to 2.6, which is still a reduction of 67.5% in beacons needed.

Multi-row arrays

For large numbers of buildings to be boosted, efficiency can be further improved by separating production buildings into multiple rows. In this case, the beacons in all but the edge rows of the array can be shared by the two rows of production buildings on either side. (Note that it does not matter if these are producing different recipes and / or are different buildings altogether.) The total number of beacons required, assuming 3×3 sized production buildings and rows of equal length, is B(r,c) = (r + 1)(c + 3) = rc + 3r + c + 3, where r is the number of rows of production buildings and c is the number of production buildings in a single row.

The number of beacons per boosted building is then (3 ÷ rc) + (1 ÷ r) + (3 ÷ c) + 1, which tends to 1 as both r and c go to infinity. For finite arrays, the optimum number of rows is given by r = -0.5 + sqrt[(n ÷ 3) + 0.25], where n is the total number of buildings to be boosted.

The formula above does not generally return integer results. If the r thus found is non-integer, iterate around it, i.e., calculate the number of beacons needed with floor(r) (the next lower integer) and ceiling(r) (the next higher integer) rows and compare the results. For each such integer r, calculate c as floor(n ÷ r), then calculate the number of beacons as B(r,c) + mod(n,r) + 1, where B(r,c) is given above and mod(n,r) is n modulo r, i.e., the remainder of (n ÷ r), equal to n - (r × c).

There will in either case be mod(n,r) buildings "left over"; these should be appended one per row to the ends of a contiguous block of neighboring rows for the total beacon count calculation above to be valid. Other configurations for the leftovers (e.g. all appended to the end of a single row, one each at the end of every second row, etc.) require a higher number of beacons to cover.

Optimal arrays

For 3×3 structures, arrays satisfying c = 3r are optimal, in the sense that they minimize the number of beacons required to cover the total number of structures (rc), therefore allowing the most use out of an individual beacon. Since structures may only be built in integer amounts, there are, below a reasonable cutoff on total array size, only a finite number of integer structure counts rc with which an optimal array such that c = 3r and c and r are integer may be built. The first few counts, along with associated array sizes and beacons-to-structures ratios, are summarized in the table below.

Structures	Rows	Columns	Beacons	Beacons per structure	Dimensions (tiles)*
3	1	3	12	4.00	18×11
12	2	6	27	2.25	27×19
27	3	9	48	1.78	36×27
48	4	12	75	1.56	45×35
75	5	15	108	1.44	54×43
108	6	18	147	1.36	63×51
147	7	21	192	1.31	72×59
...	...	...	...	...	...
3r^2	r	3r	(r + 1) (3r + 3)	1 + 2/r + 1/r^2	(9r + 9) × (8r + 3)

Notes to table:

• Array dimension in tiles (last table column) assumes 2 tiles' space (e.g. inserter + chest) is left either above or below each row of structures, while no extra space is left anywhere else.
• The 5-row array (75 structures) is the largest that can be covered by a logistic network generated from roboports located outside its footprint. For larger arrays, at least a minimal number of roboports would need to be strategically placed in the interior to provide coverage, thereby worsening the beacons-to-structures proportion somewhat.

History

• 0.13.0:
  • Renamed from Basic beacon to Beacon.

• 0.12.17:
  • Update icon

• 0.12.0:
  • Inserters can now extract from Beacons.

• 0.10.1:
  • New beacon graphics.

• 0.9.0:
  • Area of effect can now be seen on hover.

• 0.7.5:
  • Deactivated beacons will not give bonuses.

• 0.7.3:
  • Restricted use of productivity modules in beacons.

• 0.6.0:
  • Introduced

See also

• Artisanat
• Système électrique
• Modules